Für eine deutsche Übersetzung Klicken Sie hier 


SmartThings Outlet must be used with a Smart Home Hub in order to work. The Smart Home Hub user guide can be viewed at that link. 





Familiarize yourself with SmartThings Outlet


Package contents:

  1. SmartThings Outlet
  2. User manual


Important safety information.

  • Read, keep, and follow these instructions. Heed all warnings.
  • Clean only with a dry cloth.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce hear.
  • Only use attachments and accessories specified by the Manufacturer.
  • Read our Product Usage Guidelines at: www.SmartThings.com/Guidelines

 




Connect the SmartThings Outlet


Video.



Steps in SmartThings Connect.

  1. From the Home screen, touch the Plus (+) icon and select Device.
  2. Select SmartThings, touch Outlet, and then Outlet (IM6001-OTP).
  3. Touch Start.
  4. Choose a Hub for the device.
  5. Choose a Room for the device and touch Next.
  6. While the Hub searches, move the Outlet within 3m of the Hub and plug it in.


 



Using Aeotec Outlet


The SmartThings Outlet is now part of your Smart Home Hub network. It is displayed as an outlet widget that can show the switching status and energy consumption.


This section will go over how to display all information in your SmartThings Connect app.


Steps in SmartThings Connect

  1. Open SmartThings Connect
  2. Scroll down to your SmartThings Outlet
  3. Then tap SmartThings Outlet widget.
  4. On this screen, it should display:
    • ON/OFF
    • Watt Meter
    • Timer
    • On Time
    • Off Time


You may use Outlet in an Automation to control your SmartThings home automation network. To learn more about programming Smart Home Hub automations, follow that link.

 



Factory reset your SmartThings Outlet


SmartThings Outlet can be factory reset at any time if you come across any issues, or if you need to re-pair SmartThings Outlet to another hub.


Video.



Steps in SmartThings Connect.

  1. Press and Hold the connect button for five (5) seconds.
  2. Release the button when the LED starts blinking blue.
  3. The LED will blink blue two times while attempting to connect.
  4. Use the SmartThings app and steps detailed in "Connect a SmartThings Outlet" above.