Für eine deutsche Übersetzung Klicken Sie hier
For more information about the product follow the respective links:
Quick start.
Getting your Thermostatic Radiator Valve up and running is as simple as installing it and linking it to your Z-Wave network. The following instructions tell you how to add your Thermostatic Radiator Valve to your Z-Wave network using an existing gateway.
Installing TRV:
- Mount the adapter first.
- (If you use a RA adapter) Tighten the RA adapter using an Allen Key.
- (If you use a M30 adapter) Tighten the M30 adapter by and by twisting it clockwise.
- Screw in your TRV Thermostat over the adapter, and hand tightens by twisting clockwise.
- Press and hold for 3 seconds to fix thermostat.
- Turn thermostat until it is correctly oriented.
Pair using an existing gateway:
- Place your gateway or controller into Z-Wave pair or inclusion mode. (Please refer to your controller/gateway manual on how to do this)
- Press and Hold Button ( ) on Thermostatic Radiator Valve for 3 seconds then release. ("M" will display over the LCD display)
- Your gateway should confirm if Thermostatic Radiator Valve is successfully included into your network.