Hinweis: This driver is provided by Mariano from the community. To support him click the link: Donut


Installation of the configuration driver.

  1. Login SmartThings Advanced Web App
  2. Open the following Link:
    1. https://api.smartthings.com/invitation-web/accept?id=6b68563b-1905-4654-8d2b-e677a2997424
  3. Choose your Hub and tap on Enroll
  4. Tap Available Drivers
  5. Choose Zigbee Thing Mc and tap Install


Changing a device driver

Note: Your installed device must already be using an Edge driver for the driver to be changed.


  1. Open SmartThings App
  2. Change to devices
  3. Select your device to be configured and open it by tapping on it
  4. Tap 3 points Menu
  5. Tap on drivers
  6. Make a note of the driver you are currently using.
  7. Tap Select other driver
  8. Choose Zigbee Thing Mc
  9. Tap Use this driver.
  10. Confirm with OK
  11. Exit the menu.
  12. Go back toDashboard
  13. Tap on your device again.
  14. You will now see the Device Info

  • After successfully setting the device, you must switch back to the previous driver to use the device as usual. To do this, perform these steps again up to point 7 and then select your device driver, which you have noted down.