These instructions describe how you can use the Door/Window Sensor 7 without magnet as a garage door sensor with the help of an additional tilt sensor.


Material needed:


Aeotec Door/Window Sensor 7 (ZWA008)

VELLEMAN - MERS4 Tilt switch - Metal housing 144410



Installation:


Connect the sensor to terminals 3 and 4 of the door/window sensor 7.


Note that the sensor does not fit into the housing and must be guided through the holes in the housing!


  • #1: Not used.
  • #2: Not used.
  • #3: Digital Input
  • #4: Ground


After the sensor has been attached, close the housing and align the tilt sensor so that it triggers when tilted.


Opened state:

Closed state:


Necessary settings


To be able to use the sensor correctly, you must now adjust the following parameters.


ParameterGrößeWertBeschreibung
111Activates the external input
211Changes the state of the external input
141
0
Deactivates the Internal Tilt function