Nicht Ihre Sprache: Klicken Sie hier für deutsch



Manual override


The switch module terminal reserves the access of manual override function for the end-user to switch on/off.

  • Switch on/off for permanent on/off function. 
  • Notes:
    • Both the adjustment on App and switch can overwrite each other, the last adjustment remains in memory.
    • The App control is synchronized with the manual switch.


Installation:


WARNING:

  1. Installation must be carried out by a qualified electrician in accordance with local regulations.
  2. Keep the device out of reach of children. 
  3. Keep the device away from water, damp or hot environment.
  4. Install the device away from strong signal sources such as microwave oven that may cause signal interruption resulted to abnormal operation of the device.
  5. Obstruction by concrete wall or metallic materials may reduce the effective operation range of the device and should be avoided.
  6. Do NOT attempt to disassemble, repair or modify the device.


Wiring Instructions and Diagrams


  1. Turn off the power supply before carrying out any electrical installation work.
  2. Connect wires according to the wiring diagram.
  3. Insert the module into the junction box.
  4. Turn on the power supply and follow switch module configuration instructions.


Without Switch:

                   

Single Control:


Double Switch:


Pairing:


  1. Start learning mode on your gateway/hub
  2. Press and hold the button for 10 Seconds to reset the device and starting learning mode.


Factory reset:


  • Press and hold the button for 10 Seconds to reset the device.
  • Press the external button 5 times for reset.


Technical Specifications:


  • Voltage: 100-240 V AC 50/60Hz
  • Max Load: 
    • LED 2x150W
    • Other 2x 5A
  • Operation Temp.: -10°C- 40°C
  • Wireless Protocol: Zigbee 3.0
  • Operation Range: <100m
  • IP Rating: IP20